PROTO Electropolisher Model 8818-V3 is a lightweight, compact, rugged industrial design for etching or polishing tasks. Used for residual stress with depth determination
by removing layers from the specimen without incurring cold-working stresses. Can also be used for general purpose metallurgical prep.
A number of accessories are available for our electrolytic polisher to ensure any sample can be polished accurately and efficiently.
• Electropolishing Stand
• Round Polishing Tips (6, 9, 12, 15 mm diameter)
• Travel Case
• Custom Electrodes
• Custom Masking Kit
A safe, non-toxic electrolytic solution developed by PROTO. Very effective in electropolishing many different materials. A great alternative to standard electrolytes. Available in 1 Liter bottles.
Weight: 8 kg (18 lbs)
Dimensions: L x W x H: 35 cm x 30 cm x 15 cm (14” x 12” x 6”)
Operating Temperature Range: 0°C to 40°C
Input Power 90-265 VAC 50/60hz 10 amps
Variable output power 0-65 VDC / 0-10 Amps
Dual mode operation etching / polishing.
Precision timer (up to 300 hours) with multiple ranges for secs, min, hours
Automatic pump and electrode power off after polish
Dual range analog current and voltage meter
End of polish buzzer
Integral stainless steel self priming gear pump with long life brushless motor
Fused input power
Auto overpower output protection
Adjustable electronic flow control
Stainless steel electrolytic tank with chill pockets and electrode holder
Replaceable spot tips, 6 mm, 9 mm, 12 mm, 15 mm diameters
Ground cable attachments: alligator clip and magnetic clip
Complete electrical cable and water hose harness
Operation manual, Operation video (CD-mpeg)
We have a line of electropolishing products to support your XRD measurements. Developed for electropolishing large samples in the field and small samples in the lab, our electropolishing system simplifies residual stress vs. depth and retained austenite vs. depth data collection.